Product Information

Silberline Start

01E-2107AR

E-2107AR Aluminium Paste

PRODUCT DESCRIPTION

E 2107-AR is a non-leafing, acid stain resistant, lenticular or silver dollar aluminum flake pigment paste. Its whiter color, deeper flop and improved smoothness of finish are normally associated with coarser pigments, making it an advance over the related SPARKLE SILVER® Premier 504-AR in automotive paints. Other grades in this series are the coarser particle size E 2102-AR and E 2104-AR.

-Non-leafing

-Medium particle size, silver dollar


PRODUCT APPLICATION

Its whiter color, deeper flop and improved smoothness of finish are normally associated with coarser pigments, making it an advance over the related SPARKLE SILVER Premier 504-AR in automotive paints.


TECHNICAL DATA

Screen Analysis (Max Retained)

99.99% minimum through 400 mesh

Non-Volatile By Weight (Target)

64% minimum by weight

Particle Size-Microns (Target)

16

Moisture Content

0.15% maximum

Specific Gravity

1.45

Solvent

Mixture of mineral spirits and high aromatic


INCORPORATION GUIDELINES

The paste should be soaked in about its own weight of solvent, ideally for one to eight hours. If using solvent alone is not feasible, the liquid coating medium can be substituted, but the dispersion time may be extended. Dispersion is best achieved by low energy stirring, using a slow speed blade capable of moving the whole mass. Further solvent or medium may be added at this stage. When a smooth consistency, free of soft aggregates has been obtained, the balance of the formulation may be slowly added. High shear should be avoided as it bends and breaks the flakes, reducing their brightness.


SAFETY AND HANDLING

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.


All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2024 Silberline Manufacturing Co., Inc. All Rights Reserved.