Product Information

Silberline Start

01SPARKLE SILVET® 764-30-E1

SPARKLE SILVET® 764-30-E1 Aluminum Pigment

PRODUCT DESCRIPTION

SPARKLE SILVET 764-30-E1 is a coarse particle size, bright, high sparkle aluminum pigment produced in pellet form to reduce the potential for generating airborne particles and to improve ease of handling. The pigment flake has a polished cornflake geometry. The pellets are produced by a low shear process for easy dispersion. The pigment flake has a cornflake geometry. The particle size distribution range is controlled to produce clean chromatic effects when used with transparent pigments and dyes. This grade will produce strong metallic effects with coarse grain aesthetics when used alone or with other pigments. SPARKLE SILVET 764-30-E1 is suitable for use in both plastics and powder coatings applications.

-Coarse particle size

-Cornflake

-Wide polymer compatibility

-Non-leafing

-Granular form


PRODUCT APPLICATION

SPARKLE SILVET E1 grades are easy to disperse and are compatible with a variety of polymers, particularly polyolefins. They are typically used to make concentrates or compounds for use in final processing by injection molding, extrusion, blow molding or blown film processes. In some cases, SPARKLE SILVET E1 can be used directly in end-use processing but care must be taken to ensure complete dispersion is achieved. Their pellet or granular form make them easy to handle and incorporate.


TECHNICAL DATA

Aluminum Flake Content (Calculated)

Non-Volatile By Volume (Calculated)

Particle Size-Microns (Target)

80

Carrier

PE Wax

Carrier Percentage

Non-Volatile By Weight (Target)

98.5 minimum by weight


INCORPORATION GUIDELINES

It is normally sufficient to tumble blend the pellets with the base resin and any additional colorants or additives before processing. Incorporation techniques should not subject the flakes to high shear forces.


SAFETY AND HANDLING

Aluminum pigment should be stored in the original shipping container and kept tightly sealed. Store containers in a cool, dry, well-ventilated, and properly rated area. Avoid any conditions that will suspend or float the particles in the air, creating a dust cloud. Avoid all possible sources of ignition. For additional information, please refer to the Safety Data Sheet (SDS) for this product, available from Silberline upon request. An SDS is supplied with all samples of this grade.


All statements, information and data presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent. Copyright 2024 Silberline Manufacturing Co., Inc. All Rights Reserved.